Furuno MU-17OC - Manual (Page 21)

14
Remote controller
VIDEO2 VIDEO1
BRILL +
RGB1 RGB2
MENU
VIDEO3
DVI
PIP1 PIP2 PIP3
Remote controller
Key name Function
RGB1* Shows the RGB1 signal.
RGB2* Shows the RGB2 signal.
DVI* Shows the DVI signal.
VIDEO1** Shows the VIDEO1 signal on the entire screen.
VIDEO2** Shows the VIDEO2 signal on the entire screen.
VIDEO3** Shows the VIDEO3 signal on the entire screen.
PIP1*** Shows the VIDEO1 signal in the picture-in-picture window.
PIP2*** Shows the VIDEO2 signal in the picture-in-picture window.
PIP3*** Shows the VIDEO3 signal in the picture-in-picture window.
BRILL (-) Decreases the display brilliance.
BRILL (+) Increases the display brilliance.
MENU Shows the main menu.
Arrow keys Select the menu items.
*: PIP window remains on the RGB1, RGB2 or DVI screen.
**: When the previous selection is PIP1, PIP2 or PIP 3, the PIP window may be erased
by pressing these keys.
***: When the previous selection is VIDEO1 (2 or 3) or the setting value on the PIP SW
TIME is from 5 to 20, these keys are inoperative. Also, pressing these keys turns the
PIP window on and off alternately.
For PIP (picture-in-picture), see “3.2 VIDEO Setting”.