Furuno MU-17OC - Manual (Page 27)

20
5.3 Clearing the Memory
You may want to clear the memory to start afresh with default settings. You can do this as
follows:
1. Press the MENU key to show the main menu.
2. Press the ► key to open the SYSTEM menu.
3. Select DEFAULT RESET by arrow keys.
4. Press the ► key to select YES.
SYSTEM menu
5. Press the ► key again to select “reset”.
6. Press the MENU key to close the menu.
RGB1 RGB2 DVI VIDEO1 VIDEO2 VIDEO3 OSD SYSTEM
INFRARED REMOTE A A
EXT BRILL CTRL OFF (OFF/ON)
DEFAULT RESET YES
All custom settings will be lost.
←key: cancel →key: reset
INFORMATION
RGB1 : 1280x1024 fH: 80KHz fV: 75Hz
RGB2 : 640x480
fH: 31KHz fV: 60Hz
DVI : NO SIGNAL
VIDEO1: NTSC
VIDEO2: PAL
VIDEO3: NO SIGNAL
PROGRAM NO. : *****