FARGO electronic FOTO 970627-510489-(04) - Manual (Page 23)

Using FotoFUN! for Macintosh 20
3. Select either the Modem or Printer Port to indicate to
which port the serial interface cable was connected. If the
Printer port is selected, AppleTalk should remain inactive
while printing with FotoFUN! unless you are using
AppleTalk through your Ethernet port. AppleTalk does not
apply when printing with the Modem port selected.
4. If you chose to install the Background Print Utility during
the installation procedure, select either On or Off to enable
or disable FotoFUN!Õs Background Printing function.
When enabled, this function allows you to work in the
foreground of your application program while printing in
the background. Please refer to Section 6 for more
information on background printing.
The next time you open the Chooser, the selected driver will no
longer be highlighted. The Chooser, however, remembers
which driver is the current one, but does not display it when
opened.
510489 FotoFUN! 7/29/98 3:26 PM Page 21