FARGO electronic FOTO 970627-510489-(04) - Manual (Page 7)

Photo Ribbon and Paper 4
3. Place the supply end of the ribbon in between the two
black ribbon drive hubs located towards the rear of the
printerÕs interior. Insert the supply end so that the ribbon
is fed from underneath the ribbon roll. Hint: the ribbon
drive hub on the right-hand side of the printer is spring-loaded.
Use the end of the ribbon core to push in this ribbon drive hub as
ribbon is inserted.
4. Place the take-up end of the ribbon in between the front
ribbon drive hubs. When installed properly, ribbon will
feed from underneath the supply end of the ribbon roll,
up and over
the top of the take-up end.
Supply
Take-up
Ribbon
drive hubs Spring-loaded
ribbon drive
hubs
510489 FotoFUN! 7/29/98 3:26 PM Page 5