FARGO electronic FOTO 970627-510489-(04) - Manual (Page 8)

C. INSERTING PHOTO PAPER, POSTCARDS, OR
LABEL PAPER
FotoFUN! paper is inserted one sheet at a time and only when
the printer prompts you to do so.
1. With ribbon installed and the printer cover closed, send a
print job to FotoFUN!
2. When you hear the printerÕs feed rollers begin to turn, insert
the paper into the printer with the glossy print side facing
down.
Note that once the rollers begin to turn, you have
about 20 seconds to insert the paper. If you wait longer than
20 seconds before inserting the paper into the printer, the
feed rollers will stop turning and the
clear light will begin
flashing quickly. To resume printing, simply press the clear
button to restart the feed rollers, and insert the paper.
IMPORTANT! Do not touch the printable side of the paper. Oil or dirt from
your hands can impair print quality. Handle blank photo
paper by grasping only the very top or bottom of the sheet.
Also, do not attempt to insert FotoFUN! paper, postcards, or
label paper into a laser printer. This media is sensitive to
extreme heat and could damage a laser printer!
3. Insert paper into the printer until it pauses. Once inserted,
paper will automatically feed and print.
NOTE: As an added feature, it is also possible to pre-load a sheet of paper
before you begin your print job. To do this, simply press the
clear
button to start the feed rollers turning. Then, insert a sheet of paper
according to the above instructions. You can now start your print job
and walk away. FotoFUN! will automatically begin printing once it
receives your print job.
5 Photo Ribbon and Paper
510489 FotoFUN! 7/29/98 3:26 PM Page 6