Fortinet FortiAnalyzer 3.0 MR7 User Manual
Page 145
Alert
Output
FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908
137
Figure 3: SNMP Access List
SNMP Agent
Select to enable the SNMP agent.
Description
Enter a descriptive name for this FortiAnalyzer unit.
Location
Enter the physical location of the FortiAnalyzer unit, such as a city
or floor number.
Contact
Enter a contact, such as an administrator’s name.
Trap Type
The type of available SNMP trap.
Trigger
Enter a number (percent) that will trigger a trap. The number can
be between 1 to 100.
Threshold
Enter a number for the threshold. The number can be between 1
and 100.
Sample Period(s)
Enter a time period, in seconds. The number can be between 1
and 28800. The default number is 600 seconds, which is 10
minutes.
During the configured time period, the SNMP agent evaluates the
trap type, for example, CPU, at every same frequency. For
example, during 600 seconds (10 minutes), the SNMP agent
evaluates Memory every 60 seconds (1 minute).
Sample Frequency(s) Enter a number for the frequency of triggers. The number can be
between 1 and 100.
Apply
Select to save the configured settings. Selecting Apply will not
save the SNMP communities because they are automatically
saved after being configured.
Create New
Select to add a new SNMP server.
This option appears only if there is no configured SNMP server.
You can add more SNMP servers using the CLI. For more
information, see the
#
The sequential order of the communities.
Community Name
The community name of the SNMP server.
Delete
Edit
Test
Expand
arrow