Fortinet FortiAnalyzer 3.0 MR7 - Manual (Page 31)

System Dashboard
FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908
31
Changing the host name
Change the FortiAnalyzer host name to differentiate the FortiAnalyzer from other
FortiAnalyzer units or other devices on your network.
To change the host name
1 Go to System > Dashboard.
2 In the System Information area, select Change for the Host Name.
3 Enter a new name for the FortiAnalyzer unit.
4 Select OK.
Changing the firmware
A FortiAnalyzer unit may be upgraded to a newer firmware version, or reverted to
a previous firmware version by selecting Update in System Information. For more
information about changing the firmware in the web-based manager, see
“Managing firmware versions” on page 169 .
License Information
The License Information area of the Dashboard displays information on features
that vary by a purchased license or contract.
For more information about RVS (remote vulnerability scanning) updates, see
“FortiGuard Center” on page 70 .
Figure 7: License Information
Synchronize with
NTP Server Select to use an NTP server to automatically set the system date
and time. You must specify the server and synchronization interval.
Alternatively, select Set Time.
Server Enter the IP address or domain name of an NTP server. See
http://www.ntp.org t o find an NTP server that you can use.
Sync Interval Specify how often the FortiAnalyzer unit should synchronize its time
with the NTP server. For example, a setting of 1440 minutes causes
the FortiAnalyzer unit to synchronize its time once a day.
RVS Engine The version of the RVS engine, and the date of its last update.
Select Update to upload a new version of the engine. For more
information on RVS, see “FortiGuard Center” on page 70 .
This feature is not available on the FortiAnalyzer-100.