Fortinet FortiAnalyzer 3.0 MR7 - Manual (Page 57)

System Config
FortiAnalyzer Version 3.0 MR7 Administration Guide
05-30007-0082-20080908
57
Figure 30: FortiAnalyzer unit log settings
Log Locally Select to save the FortiAnalyzer log messages on the FortiAnalyzer
hard disk.
Log Level Select the severity level for the log messages recorded to the
FortiAnalyzer hard disk. The FortiAnalyzer unit logs all levels of
severity down to, but not less severe than, the level you select. For
example, if you want to record emergency, critical, and error
messages, select Error.
Allocated Disk
Space (MB) The maximum size of the FortiAnalyzer log file that the FortiAnalyzer
unit saves to the hard disk.
When the log file reaches the specified maximum size, the
FortiAnalyzer unit saves current network traffic log file with an
incremental number and starts a new active log file.
Log options when
log disk is full The policy to follow for saving the current log and starting a new
active log when the FortiAnalyzer disk is full.
Select Overwrite Oldest Files to delete the oldest log entry when the
disk is full.
Select Stop Logging to stop logging messages when the disk is full.
Use System Device
Log Settings Enable to use the same settings for local FortiAnalyzer logs as device
logs. For information about device log settings, see “Rolling and
uploading logs” on page 104 .
Log file should not
exceed Enter the maximum size of the current log file that the FortiAnalyzer
unit will save to the hard disk. When the log file reaches the specified
maximum size, the FortiAnalyzer unit saves the current log file and
starts a new active log file.
When a log file reaches its maximum size, the FortiAnalyzer unit
saves the log files with an incremental number, and starts a new log
file with the same name.
This option appears only when Use System Device Log Settings is
disabled.