Fuji Bikes Cyber-Relax AS-888 - Manual (Page 15)

Reclining and use of foot rest
14
(Preparation)
• Insert the power cord plug in the receptacle and turn on the power switch on the chair.
Reclining the chair
1. While resting your back on the back rest, press the “DOWN” of the RECLINER switch.
If you keep holding down the
“DOWN” switch, the back rest
goes down while the foot rest
comes up.
Stimulation by the knead ball is
intensified as much as the back
rest is turned down.
Before reclining the back rest or elevating the foot rest,
confirm there is nobody, pet or object at the behind, under the
foot rest, or others. It could cause accident, injury or damage
on furniture.
Do not step on the back rest,
arm rest or foot rest. Person
stepping on or the chair itself
could upset the chair main unit
and cause accident or injury.
2. When the back rest is turned down to a desired angle, remove the hand from the
RECLINER switch.
• Angle of the foot rest will also change along with the
reclining angle of the back rest.
Request: When changing the reclining angle during massaging, gradually recline checking the
intensity of massaging.
WARNING
CAUTION
Upright condition
Reclined condition
FOOT REST RECLINER
UP DOWN UP DOWN
FOOT REST RECLINER
UP DOWN UP DOWN