Fuji Bikes Cyber-Relax AS-888 - Manual (Page 25)

Use of selective functions
(Operate the following with the remote controller lid opened)
24
1. Turn ON the power switch.
(Power switch is found at the back of left arm rest.)
“POINT NAVI SYSTEM” and “PRESS THE START SWITCH”
are shown alternately on the display.
(These are displayed regardless whether the lid is opened or
closed.)
2. Open the lid and push the “START/RESET” button.
3. “Preparing” is shown first and then the “Select a
Course”.
4. Push the “MASSAGE” selector button and select a
desired function from the massage menu.
Selected function is high-lighted.
Push again to select subsequent functions, which will be
high-lighted at each push.
5. After showing the selected function with high-light for
approx. 2 seconds, the timer is shown and the
movement of selected function starts.
(For the display at this time, refer to Page 10.)
Each movement terminates approx. 15 minutes later according to
the message on the LCD display.
POINT NAVI
SYSTEM
PRESS THE
START SWITCH
START/
RESET
STOP
Select a Course
KNEAD UP RUBBING
KNEAD DOWN DEEP KNEAD
TAP STRETCH
WAVELET SHIATSU
SHOULDER
3D TAPPING
AIR:
STRONG
MIN
sp: st: w:
POINT
TAPPING