Fuji Bikes Cyber-Relax AS-888 - Manual (Page 19)

Use of the AUTO COURSE
(Operate the following with the remote controller lid closed)
18
9. As the cycle time to accept the ADJUST SHOULDER
position elapses, Completed “POINT NAVI” is displayed.
10. After showing the CONTOUR OF YOUR BACK for approx.
10 seconds, the screen changes to the display of the
name of AUTO COURSE massaging at present, present
position of knead balls, type of massage, Strength of
COURSE, air setting and remaining time of massage.
11. If you press the “STRENGTH” button on the way
of massaging, the strength of COURSE can be adjusted
at 5 levels.
• Default setting is at “3”.
If you push the button at the next, it returns to the weakest level of
“1” and it goes up step by step at each push on the button.
* There are some positions where the strength is fixed and
unchangeable at some parts of waist, neck or shoulder.
WHOLE BODY
Complated
“POINT NAVI”
WHOLE BODY
Contour of
YOUR BACK
WAVELET
St:
MIN
WHOLE BODY
Kind of massage
Air setting
Knead ball position in
the line of back direction
COURSE name
COURSE Strength
Knead ball thrust position
Remaining time
AUTO
COURSE
WHOLE
SHOLDER
WAIST
7 MIN
STRENGTH
ADJUST
SHOLDER
UP
DOWN
AIR
STRENGTH
S G
AIR:
STRONG