Fuji Bikes Cyber-Relax AS-888 - Manual (Page 20)

Use of the AUTO COURSE
(Operate the following with the remote controller lid closed)
19
12. You can adjust the AIR setting during the COURSE.
Push the “AIR” button so that the present setting is
high-lighted.
• Display will be switched at each push on the “AIR” button and the
selected movement will start up.
• Section on the move is displayed on the LCD.
♦ With the “FOOT STRETCH”, the foot rest is brought down while
the air pressure is applied to the section, in order to massage the
entire legs.
Foot rest goes down automatically. Confirm that there is not a
child or pet under the foot rest.
13. As the cycle of AUTO COURSE completes, the
knead balls return to the Storing position automatically.
• If you like to terminate the massage on the way, push the
“START/RESET” button.
The knead balls return to the Storing position also in this case.
14. Turn “OFF” the power switch after use.
This prevents the massaging chair from starting when the remote
controller was operated accidentally.
Turn “OFF” the power switch after use.
There is risk of accident by mischief of child.
Finished
CAUTION
CAUTION
AUTO
WHOLE
SHOLDER
WAIST
7 MIN
STRENGTH
ADJUST
SHOLDER
UP
DOWN
AIR
AIR: STRONG
FOOT STRETCH
AIR: GENTLE
AIR: OFF
Storing
COURSE