Furuno FELCOM 16 - Manual (Page 114)

4. INMARSAT C OPERATIONS
4-20
4.1.6 Accessing the code number services
A range of special safety and general maritime services, known as the code
number services, may be transmitted. The list on the next page shows the code
number services available.
To access a code number service do the following:
1. Using the text editor, prepare message requesting a code number service.
2. Press the [F3] key to open the Transmit menu.
3. Press the [1] key to display the Transmit Message menu.
25 Char. [ Line 2/ 2 Col. 1 ]
<[1] UNTITLED1>
----*---------+---------+---------+---------+---------+---------+---------<
[Insert ]
Transmit
1. Transmit Message
2. Cancel
3. Request Delivery Status
Transmit Message
Normal
Message now being edited Size 24
TELEX
ON
00:00
Immediate
IA5
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Priority
Message File
Station Name Cost ********.**(US$)
Destination Type
Prefix Code
Country/Ocean Code
Station ID
Modem Type
Address
Subject
Attach File
LES ID
Option
Confirmation
Send Delay
Delivery Delay
Code
[ TRANSMIT ]
Displayed if toll charges have been entered. See para. 2.6.1.
Not used.
Transmit message menu
4. Press the [
↓] key twice to choose Destination Type.
5. Press the [Enter] key to open the destination type options window.
6. Press the [
↓] or [↑] key to choose SPEC (Special).
7. Press the [Enter] key to close the window.
8. Press the [
↓] key to choose Station ID.
9. Press the [Enter] key to open the station ID entry window.
10. Key in code number referring to the table on the next page.
11. Press the [Enter] key to close the window.