Furuno FELCOM 16 - Manual (Page 67)

2. SYSTEM INITIALIZATION
2-33
2.9.2 Specifying directory where to store messages
You may specify the directory where to store messages on the hard disk as
follows:
1. Press the [F8] and [7] keys to show the Directories menu.
2. Press the [
↑] key to choose Message Directory and press the [Enter] key.
Message directory
3. Press the [ ↓] key to place the cursor on [●●].
4. Press the [Enter] key. Root directory is displayed.
5. Press the [
↓] or [↑] key to choose a directory.
6. Press the [Enter] key.
7. Pres the [Esc] key to show the Update window.
8. Yes is selected; press the [Enter] key.
9. Press the [Esc] key twice to return to the standby display.
Note:
The directory where to store EGC messages can also be created as
above. Choose EGC Message Directory at step 2 in the above procedure.