Furuno FELCOM 16 - Manual (Page 137)

5. DATA REPORTING AND POLLING
5-7
5.1.3 Automatic printing of data report, polling command
Data reports and polling commands are automatically printed, in the default state.
If you do not require automatic printing of data reports or polling commands do
the following:
1. Press the [F8] key to open the Setup menu.
2. Press the [5] key to choose Auto Mode Setup.
Auto Mode Setup
Auto Log Print OFF
Receive Alarm OFF
Auto Receive Message Save OFF
Auto Receive Message Print OFF
Data Report & Polling Print OFF
Auto EGC Message Save
Auto EGC Message Print
Auto mode setup menu
3. Press the [ ↓] or [↑] key to choose Data Report & Polling Print.
4. Press the [Enter] key to open the options window.
5. Press the [
↓] key to choose OFF. (Choose ON for automatic printing of data
report and polling command.)
6. Press the [Enter] key to close the window.
7. Press [Esc] key twice.