Hlz computer operation and programming – Frymaster Heated Landing Zone HLZ 22 User Manual

Page 7

Advertising
background image

Frymaster L.L.C., 8700 Line Avenue 71106, P.O. Box 51000, Shreveport, Louisiana 71135-1000

318-865-1711 FAX 318-862-2394

Printed in the United States Service

Hotline

Page

5

1-800-24-FRYER

7. HLZ COMPUTER OPERATION AND PROGRAMMING



















7. 1 Programming Temperature

You are able to program the setpoint temperature of both the air heater and the heater plate
via the computer interface. The heater plate factory default is set to the McDonald’s standard
of 160

°F. The air heater factory default is set to the McDonald’s standard of 220°F. If the

factory default temperature settings are acceptable, skip to Section 7.2, Page 6.

Ensure that the HLZ computer is in the OFF position (nothing in the display).

Press the check switch and enter the code (1,2,3,3). The numerals in the upper right-hand
corner represent the key number.

Press

, then

,

,

,

in order



The display will read SET and the LEDs on both the Heater Plate Switch (1) and the Air Heater
Switch (4) will light. Press the switch that corresponds to the heater you wish to program.

Heater Plate
Temperature
Switch (1)

ON/OFF Switch

Down Switch (2)

Up Switch (3)

Check or
Program Switch

Air Heater

Temperature

Switch (4)

Display

Advertising
This manual is related to the following products: