FUJITSU MHE2064AT - Manual (Page 110)

5.3 Host Commands
C141-E057-01EN 5-35
Table 5.4 Information to be read by IDENTIFY DEVICE command (5 of 7)
Bit 9, 8: Always 1
*4 Word 51: PIO data transfer mode
Bit 15-8: PIO data transfer mode X’02’=PIO mode 2
Bit 7-0: Undefined
*5 Word 53: Enable/disable setting of word 54-58 and 64-70
Bit 15-3: Reserved
Bit 2: Enable/disable setting of word 88 1=Enable
Bit 1: Enable/disable setting of word 64-70 1=Enable
Bit 0: Enable/disable setting of word 54-58 1=Enable
*6 Word 59: Transfer sector count currently set by READ/WRITE MULTIPLE
command
Bit 15-9: Reserved
Bit 8: Multiple sector transfer 1=Enable
Bit 7-0: Transfer sector count currently set by READ/WRITE MULTIPLE
command without interrupt supports 2, 4, 8 and 16 sectors.
*7 Word 63: Multiword DMA transfer mode
Bit 15-8: Currently used multiword DMA transfer mode
Bit 7-0: Supportable multiword DMA transfer mode
Bit 2=1 Mode 2
Bit 1=1 Mode 1
Bit 0=1 Mode 0
*8 Word 64: Advance PIO transfer mode support status
Bit 15-8: Reserved
Bit 7-0: Advance PIO transfer mode
Bit 1 = 1 Mode 4
Bit 0 = 1 Mode 3
*9 WORD 80
Bit 15-5: Reserved
Bit 4: ATA/ATAPI-4 supported = 1
Bit 3: ATA-3 supported = 1