FUJITSU MHE2064AT - Manual (Page 37)

Device Configuration
2-4 C141-E057-02EN
2.2 System Configuration
2.2.1 ATA interface
Figures 2.3 and 2.4 show the ATA interface system configuration. The drive has
a 44-pin PC AT interface connector and supports the PIO transfer at 16.6 MB/s
(ATA-3, Mode 4), the DMA transfer at 16.6 MB/s (ATA-3, Multiword mode 2)
and also the U-DMA at 33.3 MB/s (ATA-3, Mode 2).
2.2.2 1 drive connection
MHC2032AT
MHC2040AT
Figure 2.3 1 drive system configuration
2.2.3 2 drives connection
MHC2032AT
MHC2040AT
MHC2032AT
MHC2040AT
(Host adaptor)
Note:
When the drive that is not conformed to ATA is connected to the disk drive above
configuration, the operation is not guaranteed.
Figure 2.4 2 drives configuration
MHE2064AT
MHE2043AT
MHF2043AT
MHF2021AT
MHE2064AT
MHE2043AT
MHF2043AT
MHF2021AT
MHE2064AT
MHE2043AT
MHF2043AT
MHF2021AT