FUJITSU MHE2064AT - Manual (Page 137)

Interface
5-62 C141-E057-01EN
Bit 7: If this bit is 1, it indicates that the automatic off-line data
collection function is enabled.
Status Byte Meaning
0 Off-line data collection is not started.
2 Off-line data collection has been completed normally.
3 Off-line data collection is in progress.
4 Off-line data collection has been suspended by a command
interrupt.
5 Off-line data collection has been aborted by a command
interrupt.
6 Off-line data collection has been aborted by a fatal error.
• Number of off-line data collection segments
Indicates the number of segments required to terminate off-line data
collection.
• Time required for next segment [sec]
Indicates the time required to terminate the next segment.
• Current segment pointer
Indicates the number of the next segment to be executed.
• Off-line data collection capability
Indicates the method of off-line data collection carried out by the drive. If the
off-line data collection capability is 0, it indicates that off-line data collection
is not supported.
Bit Meaning
0 Indicates that Execute Off-Line Immediate is supported.
1 Vendor unique
2 Indicates that off-line data collection being executed is
aborted when a new command is received.
• Failure prediction capability flag
Bit 0: The attribute value data is saved to a media before the device enters
power saving mode.
Bit 1: The device automatically saves the attribute value data to a media
after the previously set operation.
Bits 2 to 15: Reserved bits