First Alert 8800 User Manual

Page 15

Advertising
background image

Setting Up

Model 8800 User's Manual

M

OUNTING A

C

AMERA

1

Select the position for the camera and secure the camera stand. (Use an appropriate
screw type for the mounting surface.)

2

Screw the camera onto the stand. Tighten the lock nut.

3

Adjust camera to the proper view angle. Make sure the lens is upright relative to the
subject. Tighten the thumb bolt.

I

NSTALLING AND

C

ONNECTING THE

C

AMERAS AND

DVR

1

Connect the camera video connector into the BNC cable (supplied).

2

Connect the BNC connector on the other end of the cable to the video input on
the DVR.

3

Plug the camera power connector into the BNC cable.

4

Plug the other end of the camera power cable into one of the camera splitter
connectors.

5

Plug the camera power connector from the 12V DC power supply adapter into the
splitter.

6

Plug the DVR power connector from the 12V DC power supply adapter into the power
input on the rear panel of the DVR.

7

Plug the power supply cord from the two adapters into an electrical outlet.

thumb screw

lock nut

Advertising