First Alert 8800 - Manual (Page 76)

Web Browser Operation
Model 8800 User's Manual
70
Use Copy To options to select All Channels, or Channels 1 through 4 individually. Click
COPY to copy settings from the current channel to All or specified channel(s).
Click CONFIRM to save changes and exit. Click CANCEL to exit without saving changes.
Click RESTORE DEFAULT to reset values to parameters before changes were made.
Click SAVE PARAMETERS to save change. Click EXIT to close the window without
saving changes.
S ERIAL
Click the SERIAL tab to open the Serial menu to adjust settings related to any serial
devices connected to the DVR (e.g., PTZ Cameras).
The RS485 Configuration settings are:
Channel: Dropdown menu (options: All Channels or Channels 1 to 4).
Baud Rate: Dropdown menu (options: 1200, 2400, 4800, or 9600).
Parity: Dropdown menu (options: None, Odd, or Even).
Decoder: Dropdown menu (options: Samsung, Panasonic, PelcoD, PelcoP, etc).
Data Bit: Dropdown menu (options: 4 to 8).
Flow Control: Currently inactive field with the default value None
Decoder Address: Enter the PTZ* address (default value: 1)
Stop Bit: Dropdown menu (options: 1, 1.5, or 2).
Copy To: Dropdown menu (options: All Channels or Channels 1 to 4).
Click COPY button to copy settings from current channel to All or specified channels.
Click CONFIRM to save changes and exit. Click CANCEL to exit without saving changes.
Click RESTORE DEFAULT to reset values to parameters before changes were made.
Click SAVE PARAMETERS to save change. Click EXIT to close the window without
saving changes.
* Cameras supplied with 8800 system are not equipped with PTZ feature.