First Alert 8800 - Manual (Page 78)

Web Browser Operation
Model 8800 User's Manual
72
To mark the time cells, click on them individually or click and drag to highlight a
larger time span. Click OK to save the changes. Click CANCEL to ignore the
changes.
Sound Alarm: Check the box to sound an alarm when an alarm is triggered.
Send to Center: Check the box to send an alarm notification with the alarm input
number, such as “Device alarm: IO alarm, IO input X” when an alarm is triggered
on the DVR.
Trigger Alarm Output: Check to display Output 1 checkbox.
Trigger Record: Choose which channels will start recording after an alarm is
initiated (options: Channels 1 to 4, All, or None).
Joint Channel: Check the box to activate a PTZ* camera (if a channel is
connected to a PTZ camera) upon alarm (options: All Channels or Channels 1 to
4).
Preset Point: Check the box to move associated PTZ* camera to Preset Point,
using a dropdown menu with preset points.
Copy To: Dropdown menu (options: All Alarm Input, and Alarm Input 1
through 4). Press COPY to copy settings from current alarm to All or a specified
alarm input.
Click CONFIRM to save changes and exit. Click CANCEL to exit without saving changes.
Click RESTORE DEFAULT to reset values to parameters before changes were made.
Click SAVE PARAMETERS to save change. Click EXIT to close the window without
saving changes.
* Cameras supplied with 8800 system are not equipped with PTZ feature.