First Alert 8800 - Manual (Page 50)

DVR Settings
Model 8800 User's Manual
44
N ETWORK
The DVR supports several two options for online viewing after an IP address is set:

DHCP (automatic mode). Acquire the IP address using the DHCP client model.

Static IP (manual mode). Indicate the IP address using the Static IP model (enter
data for IP Address, Subnet Mask, and Gateway fields).
Note: Contact your network administrator or Internet service provider for
information specific to your network and an explanation of network settings.
HTTP P ORT
The HTTP port connects to the DVR web server. By default, the value is 80. You can
specify a different port number, if needed.
C OMMAND P ORT
The command port controls the DVR. By default, the value is 5050. You can specify a
different port number, if needed.
M EDIA P ORT
The media port is used for audio and video streaming. By default, the value is 6050. You can
specify a different port number, if needed.
Note: If the DVR is installed behind a firewall server, the values of the network ports
must be set as follows in order to upload to a WAN interface:
HTTP
port: 80
Command Port: 5050
Media Port: 6050
Mobile Surveillance Port: 7050
If the DVR is installed behind a router to share a single public IP address,
configure the Port Forwarding or Virtual Server for the HTTP, Command, and
Media ports:
HTTP
port: 80
Command Port: 5050
Media Port: 6050
Mobile Surveillance Port: 7050