First Alert 8800 - Manual (Page 47)

DVR Settings
Model 8800 User's Manual
RECORD Select (checkmark) to trigger immediate motion detection from
the selected cameras.
ALARM OUT Select to enable the Alarm Output when motion is detected.
BUZZER Select to enable the internal buzzer when motion is detected.
EMAIL Select to send an email, when motion is detected, to the
indicated address(es), including a snapshot of the event. (See
information on setting up the list of email addresses.)
UPLOAD Select to send a message to the browser applet when motion is
detected. Message will display in the top right corner of the
browser window. (Requires an established remote connection
between the DVR and a PC via the Internet.)
V IDEO L OSS H ANDLING
Video loss defines the behavior of the DVR if the signal from a camera is lost. Click the
>> button to set the alarm out, buzzer, upload, and email options.
ALARM OUT Select to enable the Alarm Output when video loss is detected.
BUZZER Select to enable the internal buzzer when video loss is detected.
UPLOAD Select to send a message to the browser applet when video loss
is detected. Message will display in the top right corner of the
browser window. (Requires an established remote connection
between the DVR and a PC via the Internet.)
EMAIL Select to send an email, when video loss is detected, to the
indicated address(es), including a snapshot of the event. (See
information on setting up the list of email addresses.)
Note: These options only apply to previously selected camera channels (listed by the
column of check boxes.)