First Alert 8800 - Manual (Page 44)

DVR Settings
Model 8800 User's Manual
38
Place the cursor over a field and click the arrows to increase/decrease the values (1–16).
The live feed from the camera lets you view the adjustments. Right-click anywhere in the
window to return to the Camera Setting window.
M OTION D ETECTION
Set up motion detection sensitivity and manually configure the zones for motion detection.
There are four motion sensitivity options: Highest, Normal, Low, or Disable.
It is possible to enable the motion detection feature in some zones of the camera view
while other zones do not have this functionality. This may be useful when a camera covers
the road and an adjoining open area. While you want motion detection working on the area
near the entrance to the building, you do not want it triggered every time a car or truck
passes on the nearby road.
Click the >> button to select the zone(s) in the camera view where the motion detection is
activated/disabled. To view a full-screen image of the camera feed with a superimposed
grid, left-click the mouse to select/unselect each cell or drag the cursor to select multiple-
cells. Select as many zones as needed.
Blue highlighted squares indicate zones where motion will be detected. Clear squares
indicate zones where motion will not be detected.
To return to the previous menu, right-click or press ESC on the DVR front panel or remote
control.