FUJITSU MHT2060BH User Manual
Page 167
5.3 Host Commands
C141-E203-01EN 5-93
Bit 10:
'1' = Supports the Host Protected Area feature set.
Bit 9:
'1' = Supports the DEVICE RESET command.
Bit 8:
'1' = Supports the SERVICE interrupt.
Bit 7:
'1' = Supports the release interrupt.
Bit 6:
'1' = Supports the read cache function.
Bit 5:
'1' = Supports the write cache function.
Bit 4:
'1' = Supports the PACKET command feature set.
Bit 3:
'1' = Supports the power management feature set.
Bit 2:
'1' = Supports the Removable Media feature set.
Bit 1:
'1' = Supports the Security Mode feature set.
Bit 0:
'1' = Supports the SMART feature set.
*17 WORD 83
Bit 15:
= 0
Bit 14:
= 1
Bit 13: *
'1' = Supports the FLUSH CACHE EXT command.
Bit 12:
'1' = Supports the FLUSH CACHE command.
Bit 11:
'1' = Supports the Device Configuration Overlay feature set.
Bit 10:*
'1' = 48 bit LBA feature set.
Bit 9:
'1' = Automatic Acoustic Management feature set.
Bit 8:
'1' = Supports the SET MAX Security extending command.
Bit 7:
Reserved
Bit 6:
'1' = When the power is turned on, spin is started by the SET
FEATURES sub-command.
Bit 5:
'1' = Supports the Power-Up In Standby set.
Bit 4:
'1' = Supports the Removable Media Status Notification feature set.
Bit 3:
'1' = Supports the Advanced Power Management feature set.
Bit 2:
'1' = Supports the CFA (Compact Flash Association) feature set.
Bit 1:
'1' = Supports the READ/WRITE DMA QUEUED command.
Bit 0:
'1' = Supports the DOWNLOAD MICROCODE command.
*: Option
(customizing)