Furuno FM-4000 - Manual (Page 40)

FM-4000 Page 40
To transmit an Individual call you must program this directory with information
of the persons you wish to call, similar to the telephone directory of a cellular
phone.
1. Press and hold down the [CALL(MENU)] key
until the “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu appears.
2. Turn the CHANNEL selector knob to select the
“DSC Setup DSC Setup DSC Setup DSC Setup DSC Setup ” menu.
3. Press the [ENT] key, then use the CHANNEL
selector knob to select “Individual Directory Individual Directory Individual Directory Individual Directory Individual Directory .”
4. Press the [ENT] key.
5. Select “Add
Add Add Add Add ” with the CHANNEL selector knob,
then press the [ENT] key.
6. Press applicable key to enter the first letter of the
name of the vessel or person you want to reference
in the directory.
Example: Press the [2(MEM)] key repeatedly to
toggle among the seven available characters asso-
ciated with that key: 2
2 2 2 2 Æ A A A A A Æ B B B B B Æ C C C C C Æ a aa aa Æ b bb bb Æ c cc cc Æ 2 2 2 2 2 ....
If you enter a wrong charactor, press the [CLR] key
to delete the wrong character.
7. Press the [ENT] key to store the first letter in the name and move to the
next letter to the right.
8. Repeat steps 6 and 7 to complete the name. The
name can consist of up to 11 characters. If you do
not use all 11 characters press the [ENT] key to move
to the next space. This method can also be used to enter a blank space in
the name. If you enter a wrong character, press the [H/L] key until the
wrong character is selected, then enter the correct character.
9. After the 11th letter or space has been entered, press and hold the [ENT]
key to advance to the MMSI (Maritime Mobile Ser-
vice Identity Number) number entry.
10. Enter the desired number. If you enter a wrong num-
ber, press the [H/L] key until the wrong number is
selected, then enter the correct number.
11. To store the data entered, press and hold the [ENT]
key.
12. To enter another individual address, repeat steps 5
through 11.
13. Press the [CLR] key twice to return to the “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu, then press
the [CLR] key again to return to radio operation.