Furuno FM-4000 - Manual (Page 41)

Page 41 FM-4000
11.5.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel
for voice communications. When Manual is selected, the MMSI of the calling
vessel is shown, allowing you to see who is calling. This function is similar to
the caller ID on a cellular phone.
1. Press and hold down the [CALL(MENU)] key
until the “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu appears.
2. Turn the CHANNEL selector knob to select
“DSC Setup DSC Setup DSC Setup DSC Setup DSC Setup ” menu.
3. Press the [ENT] key, then use the CHANNEL
selector knob to select “Individual Reply Individual Reply Individual Reply Individual Reply Individual Reply .”
4. Press the [ENT] key.
5. Turn the CHANNEL selector knob to select “Au-
Au- Au- Au- Au-
tomatic tomatic tomatic tomatic tomatic ” or “Manual Manual Manual Manual Manual .”
6. Press the [ENT] key to store the selected setting.
7. Press the [CLR] key twice to return to the “Radio Setup
Radio Setup Radio Setup Radio Setup Radio Setup ” menu, then press
the [CLR] key again to return to radio operation.
11.5.3 Setting up Individual/Group Call Ringer
When an Individual call or Group call is received the radio will produce a ring-
ing tone for two minutes. This selection allows the Individual call ringer time to
be changed.
1. Press and hold down the [CALL(MENU)] key
until “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu appears.
2. Turn the CHANNEL selector knob to select
“DSC Setup DSC Setup DSC Setup DSC Setup DSC Setup ” menu.
3. Press the [ENT] key, then use the CHANNEL
selector knob to select “Individual Ringer Individual Ringer Individual Ringer Individual Ringer Individual Ringer .”
4. Press the [ENT] key.
5. Turn the CHANNEL selector knob to select
ringing time for an Individual call.
6. Press the [ENT] key to store the selected setting.
7. Press the [CLR] key twice to return to the “Radio Setup
Radio Setup Radio Setup Radio Setup Radio Setup ” menu, then press
the [CLR] key again to return to radio operation.