Furuno FM-4000 - Manual (Page 54)

FM-4000 Page 54
3. Press [ENT] key to show the Position Send Di-
rectory. This directory uses the Individual Di-
rectory information.
4. Turn the CHANNEL selector knob to select a
name in the directory, then press the [ENT] key.
5. Press the [ENT] key again to send your posi-
tion to the selected vessel.
6. Press the [CLR] key twice to return to the “Ra- Ra- Ra- Ra- Ra-
dio Setup dio Setup dio Setup dio Setup dio Setup ” menu, then press the [CLR] key
again to return to radio operation.
Manual Calling
You may enter an MMSI number manually to send your position to that vessel
without entering it into the Setting up the Individual / Position Call Directory.
1. Press the [CALL(MENU)] key to show the “DSC DSC DSC DSC DSC
Call Menu Call Menu Call Menu Call Menu Call Menu .”
2. Turn the CHANNEL selector knob to select
“Pos Report Pos Report Pos Report Pos Report Pos Report .”
3. Press [ENT] key to show the Position Send
Directory. This directory uses the Individual
Directory information.
4. Turn the CHANNEL selector knob to select
“Manual Manual Manual Manual Manual ,” then press the [ENT] key.
5. Enter the MMSI number (nine digits: first digit
permanently set to “0”) which you want to con-
tact, then press the [ENT] key.
6. If you enter a wrong number in the MMSI num-
ber, press the [H/L] key until the wrong number is
selected, then enter the correct number.
7. When you have finished entering the MMSI num-
ber, press and hold the [ENT] key.
8. Press the [ENT] key to send your position to the
selected vessel.