Furuno FM-4000 - Manual (Page 61)

Page 61 FM-4000
12.9 KEY BEEP
Set the beep tone volume level when a key is pressed.
1. Press and hold down the [CALL(MENU)] key until
the “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu appears.
2. Press the [ENT] key, then use the CHANNEL selec-
tor knob to select “Key Beep Key Beep Key Beep Key Beep Key Beep .”
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the de-
sired level. The beep can be set from “Level 1 Level 1 Level 1 Level 1 Level 1 ” to
“Level 6 Level 6 Level 6 Level 6 Level 6 ,” “High High High High High ,” or “Off Off Off Off Off .”
5. Press the [ENT] key to set the key beep condition.
6. To exit this menu and return to radio operation mode,
press the [16/9] key.
NOTE
Emergency alarm and beeps for DSC operation cannot be turned OFF.
12.10 WEATHER ALERT SETUP
The NOAA Weather alert can be enabled or disabled. The default setting is
“On SCAN and WX CH.”
1. Press and hold down the [CALL(MENU)] key until
the “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu appears.
2. Press the [ENT] key, then use the CHANNEL selec-
tor knob to select “Weather Alert Weather Alert Weather Alert Weather Alert Weather Alert .”
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the de-
sired WX alert mode. The WX alert mode can be
set to “On WX CH
On WX CH On WX CH On WX CH On WX CH ,” “On SCAN On SCAN On SCAN On SCAN On SCAN ,” “On SCAN and On SCAN and On SCAN and On SCAN and On SCAN and WX WX WX WX WX
CH CH CH CH CH ,” or “Off Off Off Off Off .”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode,
press the [16/9] key.