Frymaster LOV BIGLA30 - Manual (Page 87)

BIGLA30 SERIES GEN II LOV™ GAS FRYER
APPENDIX C: Solid Shortening Melter Use
• Ensure shortening melter is on.
• Fill melter with shortening.
• Allow 2-3 hours for solid shortening to
melt. DO NOT attempt to use the top off
system with unmelted oil in the top off
system. The low oil reservoir light will
come on if the fryer calls for oil before
the shortening in the melter is liquid.
• Once the shortening is fully melted,
press and hold the orange reset button
to turn off the light and reset the top off
system.
• DO NOT ADD hot oil to the shortening
melter. The temperature of the oil
reservoir should not exceed 140°F. Add
small amounts of solid shortening to the reservoir to ensure it has sufficient oil to
operate the top-off system.
• For best results, DO NOT TURN OFF the solid shortening melter overnight.
• The on/off switch for the melter is also used as a reset switch if the system’s high
limit temperature is reached.
Melter
ON/OFF
switch
Reset oil reservoir system