Furuno FCV295 - Manual (Page 25)

1. OPERATION
17
Entering a waypoint by manual entry of
position
1. Press the [MENU/ESC] key to open the
menu.
2. Use S or T to select Data and press the
[ENTER] key.
3. Use S or T to select WPT List and press
the [ENTER] key.
4. Use S or T to select an empty waypoint
and press the [ENTER] key. The way-
point setting window appears, showing
current position in latitude and longitude.
5. Use S or T to select item desired and
press the [ENTER] key.
6. Enter latitude and longitude, similar to
how entered waypoint name.
7. Press the [MENU/ESC] key to register the
waypoint.
8. Press the [MENU/ESC] key several times
to close the window.
1.18.2 Editing waypoints
1. Press the [MENU/ESC] key to open the
menu.
2. Use S or T to select Data and press the
[ENTER] key.
3. Use S or T to select WPT List and press
the [ENTER] key.
4. Use S or T to select the waypoint to edit
and press the [ENTER] key. The way-
point setting window appears.
5. Use S or T to select the item to edit.
6. Edit item as appropriate.
7. Press the [MENU/ESC] key several times
to close the window.
1.18.3 Erasing waypoints
A waypoint currently selected as destination
waypoint cannot be erased.
1. Press the [MENU/ESC] key to open the
menu.
2. Use S or T to select Data and press the
[ENTER] key.
3. Use S or T to select WPT List and press
the [ENTER] key.
4. Use S or T to select the waypoint to
erase and press the [ENTER] key.
5. Use S or T to select Erase? and press
the [ENTER] key.
6. Use S or T to select Yes and press the
[ENTER] key.
7. Press the [MENU/ESC] key three times to
close the window.
For name For L/L (ex. latitude)