Furuno FCV295 - Manual (Page 37)

2. SYSTEM MENU
29
2.3 Range Menu
The Range menu is where you can pre-set
basic ranges, zoom range, bottom lock range,
and turn independent range adjustment on or
off. The default values are suitable for most
fishing applications, however you may wish to
change pre-set ranges to suit your needs.
Note that when the depth unit is changed all
range settings are restored to default. There-
fore, it is a good idea to change the depth unit
first and then change ranges.
Range 1 to Range 8
1. Use S or T to select a range and press
the [ENTER] key. For example, select
Range 1, and the setting window looks
something like the one below.
2. Use S or T to set range.
3. Press the [ENTER] key to set confirm set-
ting.
Zoom Range
Zoom range sets the range for the marker
zoom and bottom zoom displays. Press S or
T to set zoom range as desired. For the hor-
izontal split screen, the range is one-half the
value set.
B/L Range
Set display range for bottom lock and bottom
discrimination displays. Use S or T to set B/
L range as desired. For the horizontal split
screen, the range is one-half the value set.
Split Range
Split range enables/disables independent ad-
justment of range in the dual frequency dis-
play. Turn on for independent adjustment.
Effective in dual frequency mode only.
1. Rotate the [RANGE] control to show the
range selection window. The window is
displayed during six sec.
2. Push the [RANGE] control. Each press
selects high or low frequency alternately.
3. Rotate the [RANGE] control to choose
desired range.
2.4 Key Menu
The Key menu selects the function for the
[FUNCTION] control and turns the key beep
on or off.
Range[HF] Range[LF]
Long-push [RANGE]
to switch between
frequencies in
dual frequency display