Furuno FCV295 User Manual

Page 34

Advertising
background image

2. SYSTEM MENU

26

User Clutter

Select the colors to reject with the clutter re-
jector.

1. Select User Clutter and press the [EN-

TER] key to show the user clutter color
bar.

2. Use S or T to select the

color to adjust and then
press the [ENTER] key.

3. Use S or T to set value, re-

ferring to the table below.

4. Press the [ENTER] key.
5. To set another color, repeat steps 2-4.
6. To enable the user clutter settings, press

S or T several times to select Custom at
the bottom of the color bar and then press
the [ENTER] key.

7. Press S or T to select Yes and press the

[ENTER] key. (The setting for HF Curve
and/or LF Curve in Clutter on the Sounder
menu automatically becomes "Custom".)

8. Press the [MENU/ESC] key three times to

quit the menu.

User 1, User 2

Define what to show on the two user display
mode screens, selectable with the [MODE]
control.

Screen Layout: Select the screen layout,
from among the following eight choices.

Display Mode: Select the displays to show.
The choices depend on the setting of Screen
Layout.

The screen modes are shown as follows:

HF: High Frequency
LF: Low Frequency
Zm: Zoom
Mix: Mix display
HF1, HF2, LF1, LF2: 1 and 2 show the same
picture. Gain can be adjusted independently
for each.

If you want to...

then set...

emphasize strong
colors (reddish-
brown, red)

Strong color- Color-6:
Large value
Color-5 to Color-1:
Small value

emphasize middle
colors (yellow, green)

Strong color to Color-
5: Small value
Color-4 and Color-3:
Large value
Color-2 and Color-1:
Small value

remove the weakest
color

Color-1: Small value

Color currently
selected

Strong color

Color 6
Color 5
Color 4
Color 3
Color 2
Color 1

Bkgd color

Display

Control for adjusting gain

HF1

[GAIN HF] control

HF2

[GAIN LF] control

LF1

[GAIN LF] control

LF2

[GAIN HF] control

Full screen
Two-way vertical split
Three-way vertical split
Two-way horizontal split
Three-way horizontal split
Four-way split
Two-way vertical split (1:2)
Two-way horizontal split (2:1)

: HF; LF; HZm; LZm; Mix
: HZm+HF; LZm+LF; LF+HF;
LZm+HZm; HF+Mix; LF+Mix;
HF2+HF1; LF2+LF1
: LF+HZm+HF; LZm+LF+HF;
LF+HF+Mix
: LZm+LF+HZm+HF
: HZm+HF; HZm+LF; LF+HF
LZm+HZm; HF+Mix;LF+Mix
: HZm+HF; LZm+LF

,

,

Advertising