Frymaster Enodis MPH52/55 SERIES - Manual (Page 69)

2-16
ITEM PART # COMPONENT
1 Valve Assembly, Microswitch and Ball Valve
106-3452 Valve Rear Flush Assembly, Left Side
106-3453 Valve Rear Flush Assembly, Right Side
2 810-2493 Elbow, 90° x ¼-inch
3 809-0601 Clip, Rod End Clevis
4 Shaft, Rear Flush Valve
211-6701 For use in Left oil return valve assemblies.
212-6701 For use in Right oil return valve assemblies.
5 Handle, Rear Flush Valve
901-2772 For use in Left oil return valve assemblies.
902-2772 For use in Right oil return valve assemblies.
6 813-0165 Elbow, 90° x ½-inch Street
7 813-0087 Nipple, 1½-inch BM NPT
8 810-2201 Valve, ½-inch Ball
* 900-2935 Oil Return Valve Nut Retainer
9 810-1668 Adapter, Male ⅝ -inch Flexline to ½-inch NPT Male
9a 810-2786 Adaptor, ½-inch Flare x ½ -inch NPT
10 807-2484 Valve, ¼-inch NPT Solenoid Vent
11 Manifold, BIPH52 Rear Flush Oil Return
810-2890 Two-Station Fryer
810-2891 Three-Station Fryer
810-2892 Four-Station Fryer
810-2893 Five-Station Fryer
12 813-0156 Cap, ½-inch Pipe
13 816-0220 Insulation, Rear Flush Switch
14 807-4101 Microswitch, Lever Activated
15 826-1366 Nut, 4-40 Keps Hex (Pkg. of 25)
16 826-1359 Screw, 4-40 x ¾-inch Slotted Round Head (Pkg. of 25)
17 809-0250 Nut, 6-32 Keps Hex
18 200-8745 Cover, Microswitch Rear Flush
19 807-0125 Bushing, .50 ID Heyco SB-750-8 Nylon
20 813-0700 Nipple, ¼ NPT x 3-inch
21 816-0643 Grip, Oil Return Handle
22 810-1067 Flexline, ⅝-inch OD x 8.50-inch Oil Return
23 810-2787 Flexline, ½” x 5.00-inch Pump to Oil Return Manifold
24 810-1680 Flexline, ⅝-inch OD x 6.50-inch Oil Return Manifold to Pump
25 811-1071 Tube, ¼-inch OD Teflon Manifold Vent