Fostex FD-8 - Manual (Page 74)

Preview Function
74
Approx. 2sec.
1 sec. (mute playback) 1 sec. (normal playback)
The sound rises at the memory point.
Approx. 2sec.
1 sec. (normal playback) 1 sec. (mute playback)
The sound falls at the memory point.
SHIFT
AUTO RTN
PGM SEL
AUTO RTN
OUT IN END
STORE HOLD/
AUTO PLAY
OUT IN START
EDIT REDO
LOCATE
VARI
PITCH
UNDO/
P.EDIT LOC MEM
CLIPBOARD AUTO PUNCH
PREVIEW
SHIFT
AUTO RTN
PGM SEL
AUTO RTN
OUT IN END
STORE HOLD/
AUTO PLAY
OUT IN START
EDIT REDO
LOCATE
VARI
PITCH
UNDO/
P.EDIT LOC MEM
CLIPBOARD AUTO PUNCH
PREVIEW
The preview function enables you to repeatedly audition the rise (fade in) or the fall (fade out) of the sound data
at a locate point (edit point) that is stored in the AUTO PUNCH IN/OUT, AUTO RTN START/END, or CLIPBOARD
IN/OUT key. This is also called “point rehearsal.”
With this function, you can check the locate points in real-time. You can also use this function to fine-tune the
position of the locate points while previewing the sound. This function is effective only when the FD-8 is stopped.
Preview Function
The FD-8 repeats playback of the “fall sound” at the locate
point (edit point). As shown in the diagram, one-second
of data prior to the locate point is played back, then
muted (fade out) at the locate point. The muted playback
continues for one second. The FD-8 will repeat this
operation until you quit the Preview function.
The FD-8 repeats playback the “rise sound” at the locate
point (edit point). As shown in the diagram, one-second
of data prior to the locate point is muted during
playback. The mute is off (fade in) at the locate point
and the sound is played back for one second.
The FD-8 will repeat this operation until you quit the
Preview function.
• Previewing the rise of the sound (fade in)
While holding down the SHIFT key, press the AUTO RTN
START key, the AUTO PUNCH OUT key, or CLIPBOARD IN
key.
• Previewing the fall of the sound (fade out)
While holding down the SHIFT key, press the AUTO END
START key, the AUTO PUNCH IN key, or the CLIPBOARD
OUT key.
<Display indication during the Preview operation> <Display indication during the Preview operation>
ABS
LOC S M H F SF
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK SCSI
44.1kHz
ABS
LOC S M H F SF
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK SCSI