Video output, Dip switch – FUJITSU CG-311 SERIES User Manual
Page 14
Advertising
En-12
VIDEO OUTPUT
BNC OUTPUT
The output of this connector is a composite
Video Signal. Use a high quality 75
Ω
coaxial
cable between the camera and other video
equipment. At the “Video Equipment”end of
the coaxial cable, terminate the signal with a 75
Ω
resistor.
DIP SWITCH
NOTE:
7 is factory setup.
Fig. 7
#1:
#2:
#3:
#4:
AGC
ESC
BLC
ECLP
#5:
#6:
#7:
#8:
AWB
SYNC
D/N
FL
#1: AGC
OFF/ON
#5: AWB
HOLD/AUTO
#2: ESC
OFF/ON
#6: SYNC
AUTO/INT
#3: BLC
OFF/ON
#7: D/N
AUTO/HOLD
#4: ECLIPSEROFF/ON
#8: FLICKERLESS ON/OFF
Advertising