FUJITSU CG-311 SERIES - Manual (Page 3)

En-1
WARNING– TO PREVENT RISK OF FIRE OR
SHOCK, DO NOT EXPOSE THIS CAMERA
TO RAIN OR MOISTURE.
PRECAUTION:
¶ DO NOT REMOVE ANY COVER WHILE THE
CAMERA IS OPERATING.
¶ PAL: USE ONLY RECOMMENDED POWER
SUPPLY, 24 VAC (21.6 to 26.4 VAC) 50
Hz or 12VDC(10.8 to13.2VDC).
NTSC: USE ONLY RECOMMENDED POWER
SUPPLY, 24 VAC (21.6 to 26.4 VAC) 60
Hz or 12VDC(10.8 to13.2VDC).
CAUTION:
¶ LENS MOUNT OF THE CAMERA IS “CS”
MOUNT.
¶ CAMERA LENS MOUNT IS SHALLOW, SOME
CAMERA LENSES MAY BOTTOM OUT AND
DAMAGE TO THE CCD IMAGER.
¶ DO NOT TOUCH THE CCD GLASS SURFACE.
¶ THE CAMERA MUST BE INSTALLED NEAR A
SOCKET-OUTLET WHICH COULD BE EASILY
ACCESSIBLE.
GRAPHIC SYMBOL EXPLANATION
The lighting flash with an arrow-
head symbol within an equilateral
triangle is intended to alert the user
to the presence of uninsulated “dan-
gerous voltage” within the pro-
duct’s enclosure that may be of suf-
ficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of im-
portant operating and maintenance
(servicing) instructions in the litera-
ture accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.