Futrex 5000/XL - Manual (Page 19)

18
1) Using a Biceps Locator measure the length between the top of the shoulder to the elbow to find the midpoint.
2) To mark the Measurement Point, place a small line on the medial side of the spot with a yellow highlighter or pen.
3) Place the Light Wand on the Measurement Site with one hand.
4) Body Fat Measurement is described on pages 6 - 10.
SELECTING THE TRICEPS MEASURING SITE
NOTE: It is suggested that the person being measured press the ENTER key with the hand not being
measured.