Futrex 5000/XL User Manual
Page 23
22
!
Press ENTER.
T
h
e
d
i
splay will then show a decimal point following the number "1". The number "2" will then be
displayed.
!
Remove the Light Wand and replace it on the same site on the body.
!
Press ENTER.
The display will show a decimal point following the number "2".
7)
The Relative Body Fat Reading is Displayed
!
Aim the silver stripe of the Light Wand vertically toward the upper portion of the body.
!
Keep the body site to be measured relaxed (do not permit subject to flex muscle area being
measured).
!
Use the Light Shield to block the external light. ALWAYS avoid measurements under strong
lights (e.g. direct sunlight) because errors may occur.
CAUTION:
Do not move the Light Wand while the decimal point is
illuminated. The actual measurement is being made at that time.