Futrex 5000/XL - Manual (Page 34)

33
b) To Change Between Units
Press either 0 or 1 and the display will show the change.
c) Press ENTER if this is correct.
d) Press ENTER a second time. If you fail to press ENTER a second time, the FUTREX-5000A/WL will continue to
use the original setting stored in the FUTREX-5000A/WL.
e) To Exit the Function Mode, turn the FUTREX-5000A/WL OFF.
F2 - Selection Calorie Limit Mode
The Fitness Analysis Program can be operated in two different calorie modes. The first mode allows the FUTREX-5000A/WL to
calculate the subject's daily caloric intake. The second mode allows the subject to enter his/her daily caloric intake value.
After entering the Function Mode:
a) Press 2
The display will show either "F2 0" or F2 1".
If "F2 0" is displayed, then the unit will automatically calculate the subject's daily caloric intake.
If "F2 1" is displayed, the user will be asked to enter a specific calorie intake value.
b) To Change Between Modes:
Press either 0 or 1 and the display will show the change.
c) Press ENTER if this is correct.
d) To Exit the Function Mode, turn the FUTREX-5000/WL OFF.
F3 - Use of Dotson-Davis Equations
After entering the Function Mode:
a) Press 3.
The display will show either "F3 0" or "F3 1".