Futrex 5000/XL User Manual
Page 5
Advertising
4
1.
Battery Installation
Insert 6 1.5V "AA" size alkaline batteries into the battery compartment
located on the rear of the Main Body. Be sure the batteries are
oriented as indicated in the battery compartment.
NOTE: Batteries must be alkaline type. Other types will not work.
2.
Light Wand
Connect the Light Wand Cable to the connector jack located on the
right hand side of the Main Body.
It is recommended that the Connector always remain attached to the
Main Body. This will avoid possible damage to the connector.
3.
A/C Adapter
Connect the A/C Adapter cable to the connector jack located on the
right hand side of the Main Body (the jack closest to the top of the unit).
PREPARATION
Advertising