Fostex MR-8HD/CD - Manual (Page 12)

MR-8HD/CD Supplementary manual
9) Use the [MENU/ENTER] knob to select
“[EXECUTE]” and press the [MENU/ENTER] knob.
The display now shows the status of finalizing.
When finalizing is completed, "
Completed! " is
shown and the disc is automatically ejected from
the CD-R/RW drive.
<Note>: Once you finalize a disc written in the
"Track at once" mode, you cannot make addi-
tional writing any more. If you reload the final-
ized disc and attempt to write a file, "Already
Finalized" is popped up and operation is can-
celled.
10) Press the [MENU/ENTER] knob.
The display returns to the CD-RW menu screen,
where "
CD Finalize " is highlighted.
11) Press the [STOP] key to exit the MENU mode.
You can also exit the MENU mode by selecting
"
Back " and pressing the [MENU/ENTER] knob
repeatedly.
You can check the TOC information after final-
ized. See "Viewing the TOC information after
finalizing" on page 14 for details.
Track 1
Track 1
Track 2
Track 3
Track 4
: Approximately two-second silence (mute)
The following shows how audio CD data is
written to a CD-R/RW disc in the "
Track at
once " or " Disk at once " mode.
• Writing a single stereo WAV file in the "Track
at once" mode:
• Writing four stereo WAV files in the "Track at
once" mode:
A two-second silence is automatically
inserted between tracks.
Track 1
• Writing a single stereo WAV file with only
CUE01 in the "Disk at once" mode:
• Writing a single stereo WAV file with three
CUE points in addition to CUE01 in the "Disk
at once" mode:
The file is divided into four tracks with
no silence between tracks.
Track 1
Track 2
Track 3
Track 4
12