Fostex MR-8HD/CD - Manual (Page 21)

MR-8HD/CD Supplementary manual
The following procedure shows how to set a file
to be imported to "
TR06 ". To set a file to " TR07 "
or " TR08 ", follow the similar procedure.
1) Use the [MENU/ENTER] knob to select
"TR06" and press the [MENU/ENTER] knob.
The display now shows the screen for
selecting a file to be imported. On the right of
"
Back ", the selected track is shown (" TR06 ",
in this example).
2) Use the [MENU/ENTER] knob to select the
desired file and press the [MENU/ENTER]
knob.
The selected file is set to " TR06 " and the
display returns to show the screen for
selecting a file to be imported (in the screen
example below, Song02.wav is set to "
TR06 ").
<Hint>: Using the method above, you can replace
the currently selected WAV file with another file. If
you want to delete the currently selected WAV file,
press the [MENU/ENTER] knob after selecting the
desired track, and after confirming that "[DELETE]"
is highlighted on the screen above, press the
[MENU/ENTER] knob again.
7) Press the [MENU/ENTER] knob.
The display now shows the CD-RW menu screen
where "
Song Import " is highlighted.
8) Press the [STOP] key to exit the MENU mode.
You can also exit the MENU mode by selecting
"
Back " and pressing the [MENU/ENTER] knob
repeatedly.
To start importing files, select " [YES] ".
To cancel importing files, select " [NO] ".
6) Use the [MENU/ENTER] knob to select "[YES]"
and press the [MENU/ENTER] knob.
The unit starts importing files. When importing
is completed, "
Completed! " is shown and the disc
access stops.
On the second page of the screen, files with no
track number in their names are shown.
<Hint>: As mentioned in <Note> on page 20,
if a file to be imported exists in the folder but
does not have a proper file name which con-
forms to the specified format, it is not automati-
cally set as an imported file. In such a case,
you can manually set the file by following the
procedure below.
21
<How to select a file manually>