Fostex MR-8HD/CD - Manual (Page 8)

MR-8HD/CD Supplementary manual
You can edit a CUE position (time) by fol-
lowing the procedure below, which is simi-
lar to the procedure for entering a CUE la-
bel as described above. The following as-
sumes that the CUE list screen is shown.
1) Use the [MENU/ENTER] knob to select the CUE
you want to edit and press the [MENU/ENTER]
knob.
2) Use the [MENU/ENTER] knob to select
"Position" and press the [MENU/ENTER] knob.
“***” of "***ms" starts flashing.
3) Use the [MENU/ENTER] knob to enter a numeric
value at the flashing point.
You can move the flashing point by using the
[REWIND] or [F FWD] key.
4) After editing the time, press the [MENU/ENTER]
knob to confirm the edited time.
5) Use the [MENU/ENTER] knob to select
"<ENTER>" and press the [MENU/ENTER] knob.
The edited time is stored.
6) Press the [STOP] key, or use the [MENU/ENTER]
knob to select " Back" and press the [MENU/
ENTER] knob.
The display returns to the Home screen of the
"
2 MIX file playback mode ".
To exit the " 2 MIX file playback mode ", select any
desired song by following the procedure described
in <Hint> on page 7.
You can delete an existing CUE in the simi-
lar manner. The following assumes that the
CUE list screen is shown.
1) Use the [MENU/ENTER] knob to select the CUE
you want to delete and press the
[MENU/ENTER] knob.
2) Use the [MENU/ENTER] knob to select
"<DELETE>" and press the [MENU/ENTER]
knob.
The selected CUE is deleted and the display
returns to the CUE list screen.
3) Press the [STOP] key, or use the
[MENU/ENTER] knob to select "
Back" and
press the [MENU/ENTER] knob.
The display returns to the Home screen of the
"
2 MIX file playback mode ".
To exit the " 2 MIX file playback mode ", select any
desired song by following the procedure
described in <Hint> on page 7.
4) After entering a desired CUE label, press the
[MENU/ENTER] knob.
" Label [Cue 02 ] " is highlighted on the screen.
5) Use the [MENU/ENTER] knob to select
"<ENTER>" and press the [MENU/ENTER]
knob.
The CUE label is stored, while the display
changes as below.
To enter or edit the label of another CUE, re-
peat the same procedure.
6) After storing the desired CUE label(s), press the
[STOP] key, or use the [MENU/ENTER] knob to
select "
Back" and press the [MENU/ENTER]
knob.
The display returns to the Home screen of the
"
2 MIX file playback mode ".
To exit the " 2 MIX file playback mode ", select
any desired song by following the procedure
described in <Hint> on page 7.
Use the alphanumeric keys to enter the desired
CUE label. When you press a different alphanu-
meric key, the cursor automatically moves right.
If you enter a character using the same key as
the previous character, use the [MENU/ENTER]
knob to move the cursor right.
In this procedure example, it is assumed that
"
Cue 02 " is entered as a CUE label.
8
Editing a CUE position
Deleting a CUE