Fostex MR-8HD/CD - Manual (Page 19)

MR-8HD/CD Supplementary manual
MIN MAX
10 0
L R
10 0
L R
10 0
L R R L
MIN MAX LINE MIC LINE MIC LINE MIC LINE MIC
REC SELECT
0 10
1 2 3 4 5/6 MASTER MAX MAX
MIN MIN
7/8
LOCATE REC END A-B PLAY LOCATE ABS ZERO
PLAY STOP RECORD REWIND F FWD
GUIDE RHYTHM CONTRAST
1-8 >SONG NEW 1-6 > 7/8 1-4 > 5/6 STEREO WAV FILE
BOUNCE
POWERFUL
MASTERING
B / OUT A / IN LOCATE STORE PLAY MODE AUTO PUNCH
NATURAL BRIGHT
TIME BASE SELECT
UNDO/REDO
7/8 >
MENU / ENTER
SIMULATION DYNAMIC CONDENSER TUBE MIC
PAN
EFFECT REVERB / DELAY TIME
HALL ROOM
PLATE DELAY
PHONES VOL
L STEREO OUT R
2 PHONES 1
MAX MIN
BAL BAL BAL
TRIM
UNBAL
PEAK
TRIM
UNBAL
PEAK
TRIM
UNBAL
PEAK PEAK
DISTORTION
GUITAR
/GUITAR
INPUT A SELECT
INSERT
BAL
UNBAL
TRIM
INPUT A INPUT B INPUT C INPUT D
ON/
OFF
POWER
ABC1 DEF2 GHI3
JKL4 MNO5
PQR6 STU7 VWX8 YZ9 +-_0 DELETE
TO STEREO BUSS
EFFECT SEND
ON/
OFF ON/
OFF ON/
OFF
60'S COMBO US METAL BRIT STACK AMP SIMULATION
INPUT A PC
Importing a mono WAV file
You can import (copy) a mono WAV file of track data recorded/edited on a PC or backup
data from a CD-R/RW disc to the hard disk of the MR-8HD/CD.
The following description assumes that a CD-R/RW disc which contains one or more
mono WAV files is set to the internal CD-R/RW drive, while a "
New Song " is loaded to the
MR-8HD/CD (see page 31 of the original manual for details about how to create a " New
Song ").
<Note>: You can import a mono WAV file from a CD-R/RW disc only using the internal CD-R/RW drive.
You cannot import a mono WAV file from a CD-R/RW disc using an external CD-R/RW drive connected to the
[USB HOST] port.
CD-R/RW disc which contains a mono
WAV file of track data recorded/edited on a
PC or backup disc
MR-8HD/CD
10) Use the [MENU/ENTER] knob to select
"[EXECUTE]" and press the [MENU/ENTER] knob.
The unit starts exporting track data to the CD-
R/RW disc. When completed, "
Completed " is
shown on the display and the disc is
automatically ejected. If you want to cancel
exporting, select to "
[CANCEL] " and press the
[MENU/ENTER] knob.
11) Press the [MENU/ENTER] knob.
The display now shows the CD-RW menu screen,
where "
Song Export " is highlighted.
12) Press the [STOP] key to exit the MENU mode.
You can also exit the MENU mode by selecting
"
Back " and pressing the [MENU/ENTER] knob
repeatedly.
<Note>: When you copy a mono WAV file of track data recorded/edited on a PC to a CD-R/RW disc and then
import it to the MR-8HD/CD, give the file name as below.
"{Song name}_{Track number}"
(Example: "My Song_1", "My Song_2" .... "My Song_8")
By giving the file name as above, a file is automatically imported to the corresponding track of the destination
song ("My Song_1" to track 1, "My Song_2" to track 2, etc.).
Note that when you import data of a backup disc created by the procedure described in "Exporting song data to
a CD-R/RW" above, a file is copied to the same track from which data has been exported.
19