Fujitsu Siemens Computers Fujitsu-Siemens PC - Manual (Page 18)

Startup
9
1)
Caution: Under the connection, there may be a toggle switch for changing the
power supply from 230 V to 115 V. The factory setting is 230 V .
2)
With an additionally installed soundcard, the sound function on the motherboard is
not activated or "Sound onboard" is not available.
3)
Important information on USB 2.0: In order to guarantee a reliable data transfer
rate, we recommend that you use USB connecting cable with a maximum length
of 4 m.
4)
Controls on the power supply (optional)
1
0
Mains on/off switch
230 115
optional
Voltage selector
Caution! Please note the mains power supply to which your computer is to be
connected and compare it with the default setting.
2.1.2 Connections, controls and indicators on the front of the
PC
Connections
The descriptions of the various connections can be found in the
previous table.
Controls
Standby
button Button to activate the standby function
and on/off for ATX systems.
Indicators
or
Power LED on The system is switched on (POWER)
Power button The system is switched on when the blue
ring is illuminated
HDD LED on Shows that the hard disk is being
accessed.
(HDD)