Supplement to the operating instructions – Fujitsu Siemens Computers Fujitsu-Siemens PC User Manual

Page 24

Advertising
background image

Supplement to the operating instructions

A-2

Supplement to the operating instructions

Guidelines and Environmental Protection

An important characteristic of our products, alongside quality and
performance, is environmental friendliness.

(I)

Protection of resources with energy-saving functions

Our units generally have energy-saving modes.

(II) Device

safety

The units meet the requirements of the low voltage directive
73/23/EEC including the amendment 93/68/EEC, certified in
accordance with EN 60950, and the directive on electromagnetic
compatibility 89/336/EEC including the amendment 93/68/EEC.

(III)

Guarantee of electromagnetic compatibility

All data and signal cables must be provided with sufficient
shielding. The minimum requirement is a Category 5 shielded
cable for 10/100 Ethernet, or Category 5e for Gigabit Ethernet. As
described in the operating instructions, all of the housing parts
must be installed.

− Requirements for work with monitors

Our units meet the requirements set for work with monitors in
accordance with the EU screen directive 90/270/EEC for the
purposes of the EU directive 89/391/EEC.

− Lasers

If your system has an optical drive such as a CD-ROM, CD-RW,
DVD or combined drive, the following applies:

With closed PC housings, the optical drives used correspond to
laser class 1 in accordance with IEC 60825-1. These contain light-
emitting diodes (LED) which under some circumstances may
generate a stronger light beam than laser class 1. A direct glance
into this beam, even with protective eyewear, is dangerous and
may lead to injury. Therefore, no parts of the optical drive housing
are to be removed.

Advertising