Fujitsu Siemens Computers Fujitsu-Siemens PC - Manual (Page 85)

59
i
Our tips and hints …
... ...for the function of the wheel mouse
If you require further information about the functions of the wheel
mouse and want to access the menus for assigning functions and
changing the settings, the procedure is as follows:
• Click on "Start" and select "Control panel".
• Click on the icon or name "Mouse" to open the "Mouse
properties" dialog box.
Here, you can adjust the mouse properties individually to match
your working methods.
... on using an optical mouse
The scanning system of an optical mouse works on many surfaces.
However, please note that heavily reflective or red surfaces may
cause faults.
... on using a mechanical mouse
Make sure that you use a mechanical mouse on a clean, flat
surface. The use of a mouse pad is recommended.
Clean the ball and the mechanical scanning system regularly.
Carefully remove the ball cover and take out the ball. This will also
provide access to the axes of the mechanical system for cleaning.
Carefully refit the parts in reverse order.