FUJITSU MPC3065AH - Manual (Page 173)

C141-E056-02EN 6 - 14
6.5 Read-Ahead Cache
After a read command which reads the data from the disk medium is completed, the read-
ahead cache function reads the subsequent data blocks automatically and stores the data in the
data buffer.
When the next command requests to read the read-ahead data, the data can be transferred from
the data buffer without accessing the disk medium. The host can access the data at higher
speed.
6.5.1 Data buffer configuration
The device has a 512-KB data buffer. The buffer is used by divided into three parts; for MPU
work, for auto transfer of write commands, for read cache of read commands (see Figure 6.10).
for R/W command for MPU work
480 KB (491,520 bytes) 32 KB
(32,768 bytes)
512 KB (524,288 bytes)
Figure 6.10 Data buffer configuration
The read-ahead operation is performed at execution of the READ SECTOR(S), READ
MULTIPLE, or READ DMA command, and read-ahead data are stored in the buffer for read
cache.